VX600 All-in-One LED Display Controller
Professional 2-in-1 video processor + 6-port sending card with 3G-SDI, HDMI, DVI multi-format inputs, PiP picture-in-picture, optical fiber output, and front-panel LCD knob with grouped shortcut buttons — supplied by Excelled, a trusted LED screen manufacturer for global B2B buyers.
What Is the NovaStar VX600 All-in-One LED Display Controller?
VX600 all-in-one LED display controller is NovaStar’s professional 2-in-1 solution that integrates a multi-format video processor and a 6-port sending card into a single 1U chassis. Building on the VX4S-N’s architecture, the VX600 upgrades to 6× Gigabit Ethernet outputs delivering approximately 3.9 million pixels of loading capacity — 50% more than the VX4S-N’s 2.6M. It accepts 3G-SDI, HDMI, and DVI inputs with a built-in hardware scaler, PiP picture-in-picture, and optical fiber output for long-distance transmission.
The front panel features a bright LCD display, rotary knob, and logically grouped shortcut buttons organized into ESC, CONTROL, INPUTS, and FUNCTION zones — enabling rapid operation without software for LED display deployments in rental staging, broadcast, conference rooms, and houses of worship. As a LED screen manufacturer, Excelled pre-configures each VX600 with input mapping, PiP presets, scaling profiles, and cabinet .rcfgx files before global shipping.
Processor + Sender
Built-in video scaler + 6-port sending card — eliminates external processor.
Ethernet Ports
6× Gigabit Ethernet outputs — 3.9M total pixel loading, 50% more than VX4S-N.
Picture-in-Picture
Dual-source overlay with dedicated shortcut button — instant front-panel control.
Button Groups
ESC / CONTROL / INPUTS / FUNCTION zones — logically grouped for fast operation.
VX600 Specifications — Electrical, Physical & Environmental
All values sourced from the official VX600 All-in-One Controller Specifications V1.5.0.
| Parameter | Specification |
|---|---|
| Controller Type | 2-in-1 All-in-One — video processor + 6-port sending card in a single 1U unit |
| Video Inputs | 1× 3G-SDI + 1× HDMI + 1× DVI — 3 multi-format inputs with auto-detection |
| Video Outputs | 6× Gigabit Ethernet (RJ45) + 1× Optical Fiber + 1× DVI Monitor (preview) |
| Max Loading Capacity | Approximately 3.9 million pixels (6 ports × 650,000 pixels/port) |
| Max Input Resolution | 1920×1200@60Hz (HDMI / DVI) — built-in hardware scaler to LED native resolution |
| Scaling Engine | Built-in hardware scaler — any input resolution to LED native, zero external processing |
| PiP (Picture-in-Picture) | Dual-source overlay — adjustable position and size, dedicated front-panel shortcut button |
| Control Interface | 1× USB Type-B (PC) · 2× UART IN/OUT (cascade up to 20 devices) |
| Front Panel HMI | LCD display + rotary knob + grouped buttons — ESC, CONTROL, INPUTS, FUNCTION zones with shortcut operations |
| Optical Fiber | 1× Optical Fiber Output — long-distance transmission, EMI immune |
| Monitor Output | 1× DVI Monitor — real-time preview of processed output signal |
| Cascade & Fiber Converter | Multi-unit cascade with fiber converter support — split PiP across main + cascade layer |
| Rated Power | AC 100–240V ~ 50/60Hz (worldwide compatible) |
| Dimensions (L×W×H) | 1U 19-inch rackmount — standard AV rack and flight case compatible |
| Mounting | 1U horizontal rackmount — adequate front and rear ventilation required |
| Operating Temperature | -20°C to +60°C |
| Operating Humidity | 10% RH to 90% RH (non-condensing) |
| Included Accessories | 1× Power cord · 1× USB cable · 1× DVI cable · Rackmount ears |
| Certifications | CE · RoHS · FCC · IC · CB · PSE |
| Software | NovaLCT (Windows) — input mapping, scaling config, PiP setup, cascade, calibration, firmware |
6-Port Output + PiP — More Capacity Than Standard All-in-Ones
The VX600’s defining upgrade over the VX4S-N is its 6-port Ethernet architecture delivering 3.9 million pixels — matching the MCTRL660 PRO’s capacity while adding the built-in video processor. This eliminates the trade-off between “all-in-one convenience” and “pixel capacity.” Accepting 3G-SDI, HDMI, and DVI inputs, the VX600 auto-detects and scales any source to the LED screen’s native resolution — no external scaler, converter box, or additional sending card required.
Grouped Button Layout — ESC / CONTROL / INPUTS / FUNCTION
Unlike generic button layouts, the VX600 organizes its shortcut buttons into four logical zones: ESC (back/cancel), CONTROL (PiP, Scale, Test, Freeze, Take), INPUTS (SDI, HDMI, DVI source selection), and FUNCTION (Brightness, Save/Load presets, Menu navigation). This grouping enables muscle-memory operation during live events — technicians can switch inputs and toggle PiP without looking at the panel. For church LED screen and rental staging crews, this physical interface is significantly faster than software-based control.
Cascade + Fiber Converter — Multi-Layer PiP
The VX600 supports multi-unit cascading with fiber converter integration, enabling a unique PiP architecture where the main layer and PiP layer can be processed by separate VX600 units connected via optical fiber — ideal for large-venue sports LED display where the control room and screen are far apart. Up to 20 units cascade via UART for synchronized multi-display deployments.
VX600 Deployment — Multi-Source Input, 6-Port Output & Cascade
Signal flow: Multiple sources (Camera SDI, PC DVI, Laptop HDMI) → VX600 multi-format inputs → built-in hardware scaler → 6× Ethernet + Optical Fiber + DVI Monitor → receiving cards → LED screen. The DVI Monitor output provides real-time confidence monitoring when the screen is not visible from the control position.
Typical Deployment Scenarios
- Live Event Production: Broadcast Camera (3G-SDI) + Presentation Laptop (HDMI) → VX600 → 6× Ethernet to stage LED wall. PiP: camera overlay on slides. Front-panel Take button for source transition.
- House of Worship: IMAG Camera (SDI) + Lyrics PC (DVI) + Backup DVD (HDMI) → VX600 → Optical Fiber to remote LED screen. Grouped INPUTS buttons for instant source switching.
- Rental Staging: Media Server (DVI) + PTZ Camera (SDI) → 2× VX600 cascaded → 12× Ethernet to multi-surface stage LED. Main + PiP layer split across units via fiber converter.
- Conference & Corporate: Presenter Laptop (HDMI) + Document Camera (DVI) → VX600 → 6× Ethernet to conference room LED wall. PiP for speaker + slides simultaneous display.
VX600 Setup with NovaLCT — Step by Step
While the front panel handles live operation, full configuration uses NovaLCT.
- Physical Connection: USB Type-B to PC. Connect SDI/HDMI/DVI sources. 6× CAT6 Ethernet + Optical Fiber to receiving cards. DVI Monitor to preview screen. AC power.
- Launch NovaLCT: Auto-detects the VX600. Verify serial number, firmware version, and 6-port Ethernet link status.
- Configure Multi-Format Inputs: Map SDI, HDMI, and DVI inputs with EDID settings. Verify signal detection on all active inputs.
- Set Scaling Mode: Configure the built-in scaler to match LED native resolution. Choose aspect ratio handling (stretch, letterbox, crop).
- Configure PiP Presets: Set PiP source, window size, and position. Save to front-panel shortcut buttons for instant recall.
- 6-Port Ethernet Mapping: Assign each port to its screen segment. Set up 3+3 redundancy for mission-critical deployments.
- Cascade + Fiber Setup: For multi-unit deployments, configure cascade topology and fiber converter routing. Set up main + PiP layer splitting if applicable.
- Save User Presets: Save complete configurations to front-panel FUNCTION presets for one-touch recall during events.
VX600 Common Issues & Diagnostic Procedures
Based on field service data. For complex issues, contact Excelled‘s engineering team.
Q1 PiP window not appearing — main source displays correctly
Diagnosis: PiP source not selected, window size at minimum, or unsupported dual-source combination.
Resolution: Press CONTROL zone PiP button → verify PiP source is assigned. Press Scale button → adjust window size. Confirm both main and PiP sources have active signals. Test with SDI main + HDMI PiP or DVI main + SDI PiP.
Q2 One of six Ethernet ports shows no output — others working
Diagnosis: Individual port mapping, cable fault, or receiving card issue on that chain.
Resolution: In NovaLCT, verify all 6 ports are mapped. Check CAT6 cable and receiving card on the non-working chain. Use LCD menu: Network Settings → cycle through all 6 port statuses. Swap cables between working/non-working ports to isolate.
Q3 Cascade fiber link not establishing between VX600 units
Diagnosis: Fiber module mismatch, UART cascade not configured, or fiber type incorrect.
Resolution: Verify SFP module compatibility between units. Confirm single-mode fiber (OS2) for long distances. In NovaLCT, configure cascade topology and assign master/slave roles. Check fiber connectors with one-click cleaner. Verify UART IN/OUT cables are connected.
Q4 Front-panel INPUTS buttons not switching sources
Diagnosis: Source not connected or input auto-detection disabled.
Resolution: Verify the target source cable is connected and the source is powered on with active signal output. In NovaLCT, check that input auto-detection is enabled for all three inputs. Test by manually selecting each input via the LCD menu instead of shortcut buttons to isolate button vs. input fault.
Q5 Scaled output looks incorrect — wrong aspect ratio or cropped
Diagnosis: Scaling mode mismatch with source or LED screen native resolution.
Resolution: Press CONTROL zone Scale button → cycle through modes: Full Screen, Proportional (letterbox), 1:1 (pixel-perfect). In NovaLCT, verify the LED screen’s physical pixel dimensions are correctly entered. For 16:9 sources on non-standard aspect ratio LED walls, use Proportional mode.
VX600 vs VX4S-N — Which All-in-One Is Right for Your Project?
The VX600 and VX4S-N share the same 2-in-1 architecture but differ in output capacity and control layout. The VX600’s 6-port output and grouped button zones make it the choice for larger screens and live-event environments where speed matters.
| Parameter | VX4S-N | VX600 | MCTRL660 PRO |
|---|---|---|---|
| Controller Type | 2-in-1 Processor + Sender | 2-in-1 Processor + Sender | Standalone Sender |
| Video Inputs | SDI + HDMI 1.4 + DVI + VGA + CVBS | 3G-SDI + HDMI + DVI | 3G-SDI + HDMI 1.4 + DVI |
| Built-in Scaler | Yes | Yes | No |
| PiP (Picture-in-Picture) | Yes | Yes | No |
| Ethernet Ports | 4× RJ45 | 6× RJ45 | 6× RJ45 |
| Max Pixel Loading | 2.6 Million | 3.9 Million | 3.9 Million |
| Optical Fiber | Yes | Yes | Yes |
| Cascade + Fiber Converter | Basic cascade | Multi-layer PiP cascade | Basic cascade |
| Front Panel Buttons | 16 buttons (flat layout) | Grouped: ESC/CONTROL/INPUTS/FUNCTION | Knob only |
| Form Factor | 1U Rackmount | 1U Rackmount | Compact Desktop |
| Best For | Multi-format, HOW, Conference | Live Events, Rental, Large Screens | Broadcast, Genlock |
NovaStar VX600 is available now from Excelled — your trusted partner for LED control systems and complete display solutions. Every controller ships pre-configured with 6-port mapping, PiP presets, bench-tested, and backed by our global warranty and engineering support team.
Explore more: LED Display Products · Rental LED Displays · Contact Excelled